Specifications
Safety Standards
• All products manufactured will be in conformity to
CAN/CSA-Z614-07
ASTM WK614
ASTM F2334
ASTM F2698
BS EN 14974:2006
Manufacturing Method
• Manufactured in an ISO 9001 (2008) Certified Company
• Lean Manufacturer
• CWB Certified (Canadian Welding Bureau)
• Equipment comes preassembled and packaged
• Product manufactured in Canada and is compliant to (NAFTA)
• Surfacing is attached by welding surface to the frame. This method eliminates surface bolts and creates a safe smooth riding surface
Surfacing and Frame
• Fabricated with Aluminum 6061-T6 square tubing (1” x 1” x 0.12”)
• Angle supports with Al 6061-T6 angle supports (1.5” x 1.5” x 0.188”) spaced 10”– 12” apart
• All support members and ramp to be welded into one piece
• Coping to be constructed from 2” diameter aluminum tubing
• Transition area from ramp to ground is one continuous piece IE: The surfacing acts as the transition area
• All Accessories are fully skirted Rails
• Fabricated with 1.375” diameter powder coated pre-galvanized Allied steel tubing
• The rails are attached with zinc-plated or stainless steel fasteners
• Rails to be powder coated with non toxic TGIC free paint
The sport of skateboarding may have been discovered on the
sunny beaches of California but Kan-Go-Roo has designed,
manufactured, and perfected a series of skateboard ramps and
accessories that will endure the harsh Canadian climate.
Why Aluminum?
Aluminum has a unique characteristic that gives it the benefit of
excellent corrosion resistance. An oxide film, bonded strongly
to the surface of aluminum, forms to protect it from corrosion.
If damaged, this film reforms almost immediately to protect the
surface from corroding in most environments. With an all aluminum
surface, Redrailed ramps are suited to withstand everyday
use in almost any climate. We use Aluminum 5052 H32 for
our product surfacing and skirting because this alloy is known
for its high corrosion resistance along with its strength. For the
frame of our products, we use Aluminum 6061-T6 because of
its high strength characteristics and very good corrosion resistance.
Safety Smooth Surface:
Redrailed ramps have been designed to allow for a safe smooth
riding surface. The riding surface is welded to the frame from
underneath. This measure ensures that the surface is free of
bolts from backing out. This feature also reduces the amount
of maintenance required since you do not have to adjust bolts
or rivets that have come loose.
Super Solid Frames
Our frames are made from aluminum angles and square tubing.
This allows for a very durable frame which is lightweight
when compared to steel or concrete. An aluminum frame helps
reduce the overall weight of the structure making it easier to
move for winter storage or reconfigurations for new riding
challenges and flow design.
Hand and Deck Rails
Our railings are manufactured from Allied playground quality
steel that contains no heavy metals. Our railings are also powder
coated with a TGIC free powder coating good for the environment
and does not contain any lead.
Ramp Skirting
Our ramps are fully skirted with aluminum sheets to avoid
vandalism and tampering. The porous nature of the aluminum
skirting also allows for the dampening of sound
and by helping to contain the sound within the structure.
Installation and Maintenance
Our ramps are virtually maintenance free, however, we
have included a simple maintenance manual to help
maintain your ramps. Our ramps also come preassembled
when possible making them very easy to install.